ENOSERV delivers software to help power companies meet the challenges of relay testing in today's time sensitive regulatory environment. ENOSERV supplies companies with rock-solid automation tools that support workgroup uniformity, process transparency & easy test results reporting.
Copyright © 2020 Doble Engineering Company ® All rights reserved.
| 918 · 622 · 4530 |
| Knowledge Base Article #133 - PowerBase Report Issues - Will not print selected setting records (always prints them all) | |||||
|---|---|---|---|---|---|
| Date | Sep 25, 2006 | ||||
| By | Ross P | ||||
| Filed Under | PowerBase | ||||
| Class | General | ||||
| Issue Addressed | |||||
| When using the Crystal Reports Generator, PowerBase will print all settings records in the substation, not just the one's selected by the "Setting Status" box. | |||||
| Causes of Issue | |||||
| When selecting to build reports in from the Substation or Relay Group drop down boxes, the report generator will include ALL nameplate information for every relay in that group or substation. Selecting entries in the "Setting Status" box, allows you to optionally print out setting records of those relays. If no settings are found that meet the criteria set out in the "Setting Status" box, the message "No Settings" will print out to signify that there are no settings sets that match. | |||||
| Solution to this Issue | |||||
| If you wish to print out only relay records that have settings, you can use the Relay drop down box. The Query tool can be used to determine which relays have settings. | |||||
| Other Comments | |||||
| For more information on the "No Settings" message, please refer to this article. | |||||
| Support Links |
|---|
| Support Main Register for Support Knowledge Base |
| Contact Support |
|---|
| Phone: (918) 622-4530 . . . . . . . . . . . . . . . . . Email: [email protected] |